Hardware Installation of the Raven
Connecting to a Computer or other Device
Figure 4-2: Serial
The serial port of your Raven can be connected directly to most computers or other devices using a standard straight through cable. If you have a DCE device, you will need a null modem or null modem cable.
Indicator Lights
When your Raven is connected to power and an antenna, there is a specific pattern to the lights to indicate its operation mode.
Figure 4-3: Raven Indicator lights
•Chan (channel) ‐ Indicates the modem has acquired a network channel.
•Link ‐ Indicates a successful connection to the cellular network.
•Reg (registration) ‐ Indicates the Raven has acquired an IP fromTELUS.
•RSSI (signal level) ‐ Light shows the strength of the signal and may be nearly solid (strong signal) or flashing (weaker signal). A slow flash indicates a very weak signal.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 33 |
|
|
|