Parts List
J
J
|
|
| A | Bed Rail Panel |
E |
|
| B | Support Arms (right and left) |
|
| C | Support Rod 1 | |
| G |
| ||
|
| D | Support Rod 2 | |
A |
|
| ||
|
| E | Side Panel | |
|
|
| ||
|
|
| F | Lower Release Button |
B |
| F | G | Upper Release Button |
|
| |||
|
| H | Support Foot | |
I |
|
| ||
H |
|
| I | Elbow |
|
|
| ||
D |
|
| J | Lock Indicators |
C |
|
|
|
|
Assembling Your Bed Rail
1 Extend Bed Rail Panel: | 1 | Locking pin |
With one hand on each edge of the bed rail panel, pull apart to |
| |
| Click | |
open the panel to its fully extended position. Be certain to listen for |
| |
|
|
two clicking sounds and feel through the cloth and be certain that both locking pins are fully extended (Figure 1).
Click 
Locking pin
2 Install Support Rod: | 2 | Holes in |
Align arrows on rods and place into hole on both support feet (Figure 2). |
| Support Foot |
Be sure that both locking pins click into place. Confirm that locking pin |
|
|
pops up in each support arm. Connect both support rods until it clicks. |
|
|
CAUTION:
• Check to ensure that pins are locked, by pulling up on rod in the opposite direction.
3 Install Bed Rail Panel: | 3 | 3a |
Locate the support arms assembled in Step 2 and press lower release buttons, lifting side panels to expose elbows and fold down side panels (Figure 3). Line up the rails on the bed rail panel with the channels on each side panel. With the logo facing down slide the bed rail panel into channels on side panels (Figure 3a).
Click
Locking
pins
PAGE 2
