Fold Down Bed Rail
WARNING:
• Use handle when releasing buttons.
8 | 8a |
CAUTION:
•Ensure that fingers are kept clear of hinged parts when folding bed rail.
•Keep children away from bed when folding
bed rail up or down.
8 Fold Down Bed Rail (to change bedding or for periods of
Push forward slightly on bed rail and press | 8b |
two upper release buttons (Figure 8). |
Press two lower release buttons and pull up handle (Figure 8a) to expose elbow hinges.
Fold the frame away from the bed and down toward the floor (Figure 8b).
To reinstall bed rail: repeat steps 5 to 7
from Installing Your Bed Rail.
Lower
Release
UpperButton
Release
Button
Long Term Storage
9 Disassemble for Long Term Periods of Non-use:
Place bed rail in fold down position. Press pin on each support foot and remove support rod (Figure 9).
Press pin on support rod and slide support rod inside itself (Figure 9a).
Locate small hole on side of panel (Figure 9b). Using two screwdrivers, press both tabs inside holes at once and pull bed rail panel from side panel. Repeat on other side. Panel can now be removed.
Locate two pins underneath fabric. Press both pins and collapse bed rail panel (Figure 9c).
Fold side panels forward (Figure 9d).
NOTE: If you saved the box that the bed rail came in, the parts can now fit into the box.
9 Fold Down Position | 9a |
Press Pin
Press Pin
9b | 9c |
|
Press Pins
Press Tabs 
9d
Press
Button
PAGE 4
