SMC Networks SMC6724L3 manual Privileged Exec

COMMAND LINE INTERFACE

Syntax

copy file {file running-config startup-config tftp} copy running-config {file startup-config tftp} copy startup-config {file running-config tftp} copy tftp {file running-config startup-config}

•file - Keyword that allows you to copy to/from a file.

•running-config- Keyword that allows you to copy to/from the current running configuration.

•startup-config- The configuration used for system initialization.

•tftp - Keyword that allows you to copy to/from a TFTP server.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•The system prompts for data required to complete the copy command.

•The destination file name should not contain slashes (\ or /), the leading letter of the file name should not be a period (.), and the maximum length for file names on the TFTP server is 127 characters or 31 characters for files on the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)

•Due to the size limit of the flash memory, the switch supports only two operation code files.

•The maximum number of user-defined configuration files depends on available memory.

•You can use “Factory_Default_Config.cfg” as the source to copy from the factory default configuration file, but you cannot use it as the destination.

•To replace the startup configuration, you must use startup-configas the destination.

•The Boot ROM and Loader cannot be uploaded or downloaded from the TFTP server. You must use a direct console connection and access

4-54