SMC Networks SMC6724L3 manual Show gvrp configuration, Garp timer

COMMAND LINE INTERFACE

show gvrp configuration

Use this command to show if GVRP is enabled.

Syntax

show gvrp configuration [interface]

interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

Default Setting

Shows both global and interface-specific configuration.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show gvrp configuration ethernet 1/7

Eth 1/ 7:

Gvrp configuration: Disabled

Console#

garp timer

Use this command to set the values for the join, leave and leaveall timers. Use the no form to restore the timers’ default values.

Syntax

garp timer {join leave leaveall} timer_value no garp timer {join leave leaveall}

•{join leave leaveall} - Which timer to set.

•timer_value - Value of timer. Ranges:

join: 20-1000 centiseconds

leave: 60-3000 centiseconds

leaveall: 500-18000 centiseconds

4-178