SMC Networks SMC6724L3 manual Report-interval, 293, Syntax Nbr-timeout seconds

MULTICAST ROUTING COMMANDS

nbr-timeout

Use this command to set the interval to wait for messages from a DVMRP neighbor before declaring it dead. Use the no form to restore the default value.

Syntax

nbr-timeout seconds

seconds - Interval before declaring a neighbor dead. (Range: 1-65535)

Default Setting

35 seconds

Command Mode

Router Configuration

Command Usage

This command is used for timing out routes, and for setting the children and leaf flags.

Example

Console(config-router)#nbr-timeout 40

Console(config-router)#

report-interval

Use this command to specify how often to propagate the complete set of routing tables to other neighbor DVMRP routers. Use the no form to restore the default value.

Syntax

report-interval seconds

seconds - Interval between sending the complete set of routing tables. (Range: 1-65535)

Default Setting

60 seconds

4-293