Perle Systems 5500161-40 manual Enable Microsoft, Special, Administrator, Console SAC, Port, Dial

Serial Port Profiles

Enable Microsoft	When enabled, a user can access SAC (the interface of the Microsoft
Special	Emergency Management Systems utility) through EasyPort Web when the
Administrator	IOLAN’s serial port is connected to a Microsoft Server 2003 or Microsoft
Console (SAC)	Server 2008 host.
support	Default: Disabled
Multisessions	The number of extra network connections available on a serial port, in addition
	to the single session that is always available. Enabling multisessions will
	permit multiple users to monitor the same console port. Each user monitoring
	the port can be assigned different privileges to this port.
	Range: Dependent on model:
	z 1-port: 0-3
	z 2-port:(4 x #-of-ports)-1
	z STS/SDS 4+ ports: (2 x #-of-ports)-1
	z SCS 4+ ports: (2 x (#-of-ports+ 1)) -1
	Default: 0
Idle Timeout	Use this timer to close a connection because of inactivity. When the Idle
	Timeout expires, the IOLAN will end the connection.
	Range: 0-4294967 seconds (about 49 days)
	Default: 0 seconds so the port will never timeout
Break Handling	Specifies how a break is interpreted.
	Data Range:
	z None—The IOLAN ignores the break key completely and it is not passed
	through to the host.
	z Local—The IOLAN deals with the break locally. If the user is in a
	session, the break key has the same effect as a hot key.
	z Remote—When the break key is pressed, the IOLAN translates this into a
	telnet break signal which it sends to the host machine.
	z Break Interrupt—On some systems such as SunOS, XENIX, and AIX, a
	break received from the peripheral is not passed to the client properly. If
	the client wishes to make the break act like an interrupt key (for example,
	when the stty options -ignbrkand brkintr are set).
	Default: None
Dial In	If the console port is remote and will be dialing in via modem or ISDN TA,
	enable this parameter.
	Default: Disabled
Dial Out	If you want the modem to dial a number when the serial port is started, enable
	this parameter.
	Default: Disabled
Dial Timeout	The number of seconds the IOLAN will wait to establish a connection to a
	remote modem.
	Range: 1-99
	Default: 45 seconds
Dial Retry	The number of times the IOLAN will attempt to re-establish a connection with
	a remote modem.
	Range: 0-99
	Default: 2

129