Perle Systems 5500161-40 Configuration Methods

IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0 51
Configuration Methods Chapter 3
3
Introduction
This chapter provides information about th e different methods you can use to configure the IOLAN.
Before you can configure the IOLAN, you must assign an IP address to the IOLAN. See the Chapter
4, Getting S tarted on page 73 to find out ho w to assign an IP address to the IOLAN.
Once an IP address is assigned to the IOLAN, you can use any of the configuration methods to:
zConfigure users.
zConfigure IOLAN server parameters.
zConfigure seria l port parameters.
zConfigure network parameters.
zConfigure time parameters.
zReboot the IOLAN.
zManage the Perle Remote Power Switch (when applicable).
zManage I/O channels (when applicable).
zView statistics while connected to the IOLAN.