Perle Systems 5500161-40 Connect to remote, System Default Enabled Host Name, Multiple Hosts

Serial Port Profiles

General Tab Field Descriptions

The TruePort General tab determines how the TruePort connection is initiated and then sets up the appropriate connection parameters.

Configure the following parameters:

Connect to remote	When enabled, the IOLAN initiates communication to the TruePort client.
system	Default: Enabled
Host Name	The configured host that the IOLAN will connect to (must be running
	TruePort).
	Default: None
TCP Port	The TCP Port that the IOLAN will use to communicate through to the TruePort
	client.
	Default: 10001 for serial port 1, then increments by one for each serial port
Connect to	When enabled, the IOLAN will establish a connection to multiple clients
Multiple Hosts	(Hosts). When using the multiple hosts feature, all TruePort clients must be
	running in Lite mode.
	Default: Disabled
Define Additional	Click this button to define the hosts that this serial port will connect to. This
Hosts Button	button is also used to define the Primary/Backup host functionality.
	See Adding/Editing Additional TruePort Hosts on page 132 for more
	information.
Listen for	When enabled, the IOLAN will wait for connections to be initiated by the
Connection	TruePort Client.
	Default: Disabled
TCP Port	The TCP Port that the IOLAN will use to communicate through to the TruePort
	client.
	Default: 10001 for serial port 1, then increments by one for each serial port
Allow Multiple	When this option is enabled, multiple hosts can connect to a serial device that
Hosts to Connect	is connected to this serial port. Note: These multiple clients (Hosts) need to be
	running TruePort in Lite mode.
	Default: Disabled

131