Perle Systems 5500161-40 manual Default Disabled Protocol, Is received

Serial Port Profiles

Connect to Remote When the serial port is started, the IOLAN will initiate a connection to the

Systemspecified host using the specified protocol. With this option, user authentication will not be performed by the IOLAN.

Default: Disabled

Protocol	Specify the protocol that will be used to connect to the specified host.
	Data Options: Telnet, SSH, Rlogin
	Default: Telnet
Settings Button	Click this button to define the settings for the protocol that will be used to
	connect the user to the specified host.
Host Name	The name (resolvable via DNS) or IP address of the configured host the
	IOLAN will connect to.
TCP Port	The TCP Port that the IOLAN will use to connect to the host.
	Default: Telnet-23, SSH-22, Rlogin-513
Automatically	If the serial port hardware parameters have been setup to monitor DSR or
	DCD, the host session will be started once the signals are detected. If no
	hardware signals are being monitored, the IOLAN will initiate the session
	immediately after being powered up.
	Default: Enabled
When any data is	Initiates a connection to the specified host when any data is received on the
received	serial port.
	Default: Disabled
When <hex value>	Initiates a connection to the specified host only when the specified character is
is received	received on the serial port.
	Default: Disabled

147