Perle Systems 5500161-40 Adding/Editing Routes, Type, Default Default, IPv4 Subnet Mask, Host

Advanced

Adding/Editing Routes

From the Route List tab, if you click the Add or Edit button, you will be able to add a new or edit an existing route.

Configure the appropriate parameters:

Type	Specify the type of route you want to configure.
	Data Options:
	z Host—A route defined for accessing a specific host external to your local
	network.
	z Network—A route defined for accessing a specific network external to
	your local network.
	z Default—A route which provides general access beyond your local
	network.
	Default: Default
IP Address	When the route Type is defined as Host, this field will contain the IP address of
	the host. If the route Type is defined as Network, the network portion of the IP
	address must be specified and the Host port of the address will be set to 0.
	Example: to access network 10.10.20, the address 10.10.20.0 would be
	specified in this field.
	Format: IPv4 or IPv6 address
IPv4 Subnet Mask	When the route is a Network route, you must specify the network’s subnet
	mask.
IPv6 Prefix Bits	If the IP address is IPv6, then you must specify the network’s prefix bits.
	Range: 0-128
Host	Select this option when a host is being used at the route gateway.
	Default: Enabled, None

101