239
VPN

Adding/Editing a VPN Exception

The following parameters are available:
IP Address
Network
IPv4 Subnet Mask
IPv6 Prefix Bits
Advanced

Field Description

Configure the following parameter:
Use NAT Traversal
(NAT_T)
Delete Button Highlight an Exceptio n List entry and click the Delete button to remove the
entry from the list.
The IP address of the host that will communicate with the IOLAN outside of
the VPN tunnel .
Field Format: IPv4 or IPv6 address
The network address that will communicate with the IOLAN outside of the
VPN tunnel.
Field Format: IPv4 or IPv6 address
The IPv4 subnet mask for the IPv4 network.
Default: 0.0.0.0
The IPv6 prefix bits for the IPv6 network.
Range: 0-128
Default: 0
NAT Traversal should be enabled when the IOLAN is communicating thro ugh
a router/gateway to a remote VPN that also has NAT Traversal enabled.
Default: Enabled