IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0 313

Controlling the RPS, I/O

Channels, and IPsec

Tunnels Chapter 14
14
Introduction
The Control section appears when the IOLAN is connected to a Remote Power Switch and/or an I/O
model or you want to control the IPsec tunnel.

RPS Control

Overview
When a Remote Power Switch’s (RPS) console port is attached to the IOLAN’s serial port and the
serial port is configured for the Power Management profile, you will be able to contro l the RPS’s
power plugs either universally or individuall y (power on/off the whole RPS or individual plugs).
Field Descriptions
The following buttons are available:
On Button
Off Button
Cycle Butto n
Reset to Default
State Button
Plug Contro l Button
Turns all the RPS plugs on.
Turns all the RPS plugs off.
Turns all the RPS plugs off and then on.
Resets all the RPS plugs to the default state as configured in the Power
Management profile settings.
Displays a window that allows yo u to manage the individual plugs on the RPS.