Perle Systems 5500161-40 manual Serial Port Access Tab, Allow Access to, Clustered Ports

Adding/Editing Users

Serial Port Access Tab

Overview

The Serial Port Access tab controls the user’s read/write access on any given IOLAN serial port. This pertains to users that are connecting from the network to a serial over a Console Management type session.

This can be useful when you have multiple users connecting to the same serial device and you wish to control the viewing and/or the write to and from the device. See the Multisessions and User Authentication parameters in the Console Management Profile on page 127 for the serial port settings.

Field Descriptions

Configure the following parameters:

Serial Port Access	Specifies the user access rights to each IOLAN serial port device. There can be
	multiple users connected to a particular serial device and these settings
	determine the rights of this user for any of the listed serial ports.
	Data Options:
	z Read/Write—The user has read and write access to the serial port.
	z Read In—The User will see data going to the serial port, from all
	network-connected users that have write privileges to this serial port.
	z Read Out—The user will have access to all data originating from the
	serial device.
	Users can read data going in both directions by selecting both the Read In and
	Read Out options.
	Default: Read/Write
Allow Access to	When enabled, allows the user access to IOLANs that have been configured in
Clustered Ports	the clustering group.
	Default: Enabled

211