Perle Systems 5500161-40 manual Adding/Editing Additional TruePort Hosts

Serial Port Profiles

Adding/Editing Additional TruePort Hosts

You can define a list of hosts that the serial device will communicate to through TruePort Lite or a primary/backup host.

Configure the following parameters:

Define additional	When this option is enabled, you can define up to 49 hosts that the serial device
hosts to connect to	connected to this serial port will attempt communicate to. With this mode of
	operation, the IOLAN will connect to multiple hosts simultaneously.
	Default: Enabled
Add Button	Click the Add button to add a host to the list of hosts that will be receiving
	communication from the serial device connected to the IOLAN.
	See Adding/Editing a Multihost Entry on page 132 for more information.
Edit Button	Highlight an existing host and click the Edit button to edit a host in the list of
	hosts that will be receiving communication from the serial device connected to
	the IOLAN.
Delete Button	Highlight an existing host and click the Edit button to edit a host in the list of
	hosts that will be receiving communication from the serial device connected to
	the IOLAN.
Define a primary	When this option is enabled, you need to define a primary host that the serial
host and backup...	device connected to this serial port will communicate to and a backup host, in
	the event that the IOLAN loses communication to the primary host. The
	IOLAN will first establish a connection to the primary host. Should the
	connection to the primary host be lost (or never established), the IOLAN will
	establish a connection the backup host. Once connected to the backup, the
	IOLAN will attempt to re-establish a connection to the Primary host, once this
	is successfully done, it gracefully shuts down the backup connection.
	Default: Disabled
Primary Host	Specify a preconfigured host that the serial device will communicate to through
	the IOLAN.
	Default: None
TCP Port	Specify the TCP port that the IOLAN will use to communicate to the Primary
	Host.
	Default: 0
Backup Host	Specify a preconfigured host that the serial device will communicate to through
	the IOLAN if the IOLAN cannot communicate with the Primary Host.
	Default: None
TCP Port	Specify the TCP port that the IOLAN will use to communicate to the Backup
	Host.
	Default: 10000

Adding/Editing a Multihost Entry

When you click the Add or Edit button, the Host Entry window appears. The hosts in the multihost list must already be defined. If you add a host that was defined with its fully qualified domain name (FQDN), it must be resolvable by your configured DNS server.

Configure the following parameters:

132 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0