Perle Systems 5500161-40 manual Session 1, 2, 3, Connect

Adding/Editing Users

Field Descriptions

Configure the following parameters:

Session 1, 2, 3, 4	You can configure up to four (4) sessions that the user can select from to
	connect to a specific host after that user has successfully logged into the
	IOLAN (used only on serial ports configured for the Terminal profile).
	Data Options:
	z None—No connection is configured for this session.
	z Telnet—For information on the Telnet connection window, see Telnet
	Settings on page 151.
	z SSH—For information on the SSH connection window, see SSH Settings
	on page 153.
	z RLogin—For information on the RLogin connection window, see Rlogin
	Settings on page 152.
	Default: None
Settings Button	Click this button to configure the connection parameters for this session.
Connect	Specify whether or not the session(s) will start automatically when the user
Automatically	logs into the IOLAN.
	Default: Disabled
Host	The host that the user will connect to in this predefined session.
	Default: None
TCP Port	The TCP port that the IOLAN will use to connect to the host in this predefined
	session.
	Default: Telnet-23, SSH-22, Rlogin-513

210 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0