Perle Systems 5500161-40 manual Using the Snmp MIB

SNMP

Using the SNMP MIB

After you have successfully connected to the IOLAN through your SNMP Management tool or MIB browser, expand the PERLE-IOLAN-SDS-MIBfolder to see the IOLAN’s parameter folders. Below is an example of the configurable parameters under the ServicesInfo folder.

The first variable in each folder is the Status variable, for example, serviceStatus. When you perform a GET on this variable, one of the following values will be returned:

z1—Indicates that the container folder is active with no changes.

z2—Indicates that the container folder is active with change(s).

Once you have completed setting the variables in a folder, you will want to submit your changes to the IOLAN. To do this, set the Status variable to 4. If you want to discard the changes, set the Status variable to 6.

z4—Indicates that the changes in the container folder are to be submitted to the IOLAN.

z6—Indicates that the changes in the container folder are to be discarded.

If you want to save all the changes that have been submitted to the IOLAN, you need to expand the adminInfo container folder and SET the adminFunction to 1 to write to FLASH. To make the configuration changes take effect, SET the adminFunction to 3 to reboot the IOLAN.

66 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0