Perle Systems 5500161-40 manual Inactive Signal, Width

Channels

Field Descriptions

Configure the following parameters:

Description	Provide a description of the channel, making it easier to identify.
	Data Options: Maximum 20 characters, including spaces
Output	Specify how the channel output will be handled.
	Data Options:
	z Manual—You must manually manipulate the channel output.
	z Pulse—Activates and deactivates the channel output activity in intervals
	after it is manually activated.
	z Inactive-to-ActiveDelay—The channel output will remain inactive for
	the specified time interval after it is manually started.
	z Active-to-InactiveDelay—The channel output will go inactive after the
	specified time interval after it is manually started.
	Default: Manual
Pulse Mode	When Output is set to Pulse, you can specify the manner of the pulse.
	Data Options:
	z Continuous—Continuously pulses active and inactive.
	z Count—Pulses an active/inactive sequence for the specified number of
	times.
	Default: Continuous
Pulse Count	The channel output will pulse for the specified number of times; each count
	consists of an active/inactive sequence.
	Default: 1
Inactive Signal	How long the channel will remain inactive during pulse mode.
Width	Range: 1-9999 x 100 ms
	Default: 1 (100 ms)

262 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0