Perle Systems 5500161-40 manual Pulse Mode, Pulse Count, Inactive Signal Width Active Signal Width

Channels

Pulse Mode	When Output is set to Pulse, you can specify the manner of the pulse.
	Data Options:
	z Continuous—Continuously pulses active and inactive.
	z Count—Pulses an active/inactive sequence for the specified number of
	times.
	Default: Continuous
Pulse Count	The channel output will pulse for the specified number of times; each count
	consists of an active/inactive sequence.
	Default: 1

Inactive Signal Width

Active Signal Width

How long the channel will remain inactive during pulse mode. Range: 1-9999 x 100 ms

Default: 1 (100 ms)

How long the channel will be active during the pulse mode. Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Delay	How long to delay an active-to-inactive or inactive-to-active setting after it is
	manually started.
	Range: 1-9999 x 100 ms
	Default: 1 (100 ms)
Failsafe Action	When there has been no I/O activity within the specified time (set in the I/O
	Interfaces, Settings on the Failsafe Timer tab) and the Failsafe Timer is
	triggered.
	Data Options:
	z None—The state of the Digital/Relay output remains the same, no change.
	z Activate Output—Activates the channel.
	z Deactivate Output—Deactivates the channel.
	Default: None

260 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0