Perle Systems 5500161-40 manual Adding Clustering Slaves

Clustering Slave List

Adding Clustering Slaves

Overview

When you add a clustering slave IOLAN entry, you are adding the IOLAN that users will access through this master IOLAN.

Field Descriptions

Configure the following parameters:

Server Name	Specify a name for the slave IOLAN in the clustering group. This name does
	not have to correspond to the proper host name, as it is just used within the
	IOLAN.
	Field Format: Maximum 15 alphanumeric characters, including spaces
IP Address	Specify the IP address of the slave IOLAN in the clustering group.
	Field Format: IPv4
Number of Ports	Specify the number of ports in the Slave IOLAN that you are adding to the
	clustering group.
	Data Options: 1, 2, 4, 8, 18, 24, 36, 48
	Default: 1

Starting Slave TCP Specify the first TCP Port number (as specified in the slave IOLAN’s serial

Port	port configuration) on the slave host.
	Default: 10001, and increments by one for each serial port
Starting Master	Specify the TCP port number you want to map the first slave IOLAN DS Port
TCP Port	number to. This number should not be a port number that is already in use by
	the master IOLAN.
	Default: 1024, and then increments by one for each new slave entry
Protocol	Specify the protocol that will be used to access the slave IOLAN port.
	Data Options: SSH, Telnet
	Field Format: Telnet

292 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0