SMC Networks SMC6724L3 manual Dvmrp Multicast Routing Commands, 290

COMMAND LINE INTERFACE

This example lists all entries in the multicast table in summary form:

Console#show ip mroute summary

IP Multicast Forwarding is enabled.

IP Multicast Routing Table (Summary)
Flags: P - Prune UP
Group	Source	Source Mask	Interface Owner	Flags

--------------- --------------- --------------- ---------- ------- ------

224.1.1.1	10.1.0.0	255.255.0.0	vlan1	DVMRP	P
224.2.2.2	10.1.0.0	255.255.0.0	vlan1	DVMRP	--

Console#

DVMRP Multicast Routing Commands

Command	Function	Mode	Page
router dvmrp	Enables DVMRP and enters router	GC	4-291
	configuration mode
probe-interval	Sets the interval for sending neighbor probe	RC	4-292
	messages
nbr-timeout	Sets the delay before declaring an attached	RC	4-293
	neighbor router down
report-interval	Sets the interval for propagating the	RC	4-293
	complete set of routing tables to other
	neighbor routers
flash-update-interval	Sets the interval for sending updates about	RC	4-294
	changes to network topology
prune-lifetime	Defines how long a prune state remains in	RC	4-294
	effect for a source-routed multicast tree
default-gateway	Configures the default gateway for IP	RC	4-295
	multicast routing
ip dvmrp	Enables DVMRP on the specified interface	IC	4-296
ip dvmrp metric	Sets the metric used when establishing	IC	4-297
	reverse paths to some networks on directly
	attached interfaces
clear ip dvmrp route	Clears all dynamic routes in the multicast	PE	4-298
	routing table
show router dvmrp	Displays global DVMRP configuration	NE,	4-298
	settings	PE

4-290