SMC Networks SMC6724L3 manual Syntax Shutdown no shutdown Default Setting

INTERFACE COMMANDS

Example

The following example enables flow control on port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#flowcontrol

Console(config-if)#no negotiation

Console(config-if)#

Related Commands

negotiation (4-121)

capabilities (flowcontrol, symmetric) (4-122)

shutdown

Use this command to disable an interface. To restart a disabled interface, use the no form.

Syntax

shutdown no shutdown

Default Setting

All interfaces are enabled.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This command allows you to disable a port due to abnormal behavior (e.g., excessive collisions), and then reenable it after the problem has been resolved. You may also want to disable a port for security reasons.

Example

The following example disables port 5.

Console(config)#interface ethernet 1/5

Console(config-if)#shutdown

Console(config-if)#

4-125