P
RIORITY

C

OMMANDS

4-262

map ip port (Interface Configuration)

This command sets IP port priority (i.e., TCP/UDP port priority). Use the
no form to remove a specific setting.
Syntax
map ip port port-number cos cos-value
no map ip port port-number
port-number - 16-bit TCP/UDP port number. (Range: 0-65535)
cos-value - Class-of-Service value (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
This command sets the IP port priority for all interfaces.
Example
The following example shows how to map HTTP traffic to CoS value 0:

map ip precedence (Global Configuration)

This command enables IP precedence mapping (i.e., IP Type of Service). Use
the no form to disable IP precedence mapping.
Syntax
[no] map ip precedence
Default Setting
Disabled
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0
Console(config-if)#