SMC Networks SMC6824M manual 263, List below shows the default priority mapping

COMMAND LINE INTERFACE

Command Mode

Global Configuration

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.

Example

The following example shows how to enable IP precedence mapping globally:

Console(config)#map ip precedence

Console(config)#

map ip precedence (Interface Configuration)

This command sets IP precedence priority (i.e., IP Type of Service priority). Use the no form to restore the default table.

Syntax

map ip precedence ip-precedence-value cos cos-value no map ip precedence

•precedence-value- 3-bit precedence value. (Range: 0-7)

•cos-value- Class-of-Service value (Range: 0-7)

Default Setting

The list below shows the default priority mapping.

Table 4-67 Mapping IP Precedence to CoS Values

IP Precedence Value	0	1	2	3	4	5	6	7
CoS Value	0	1	2	3	4	5	6	7

Command Mode

Interface Configuration (Ethernet, Port Channel)

4-263