SMC Networks SMC6824M manual 242

VLAN COMMANDS

Table 4-61 Private VLAN Commands (Continued)

Command	Function	Mode	Page
Display Private VLAN	Information
show vlan private-vlan	Shows private VLAN information	NE,	4-247
		PE

To configure private VLANs, follow these steps:

1.Use the private-vlancommand to designate one or more community VLANs and the primary VLAN that will channel traffic outside the community groups.

2.Use the private-vlan association command to map the secondary (i.e., community) VLAN(s) to the primary VLAN.

3.Use the switchport mode private-vlancommand to configure ports as promiscuous (i.e., having access to all ports in the primary VLAN) or host (i.e., having access restricted to community VLAN members, and channeling all other traffic through a promiscuous port).

4.Use the switchport private-vlan host-association command to assign a port to a secondary VLAN.

5.Use the switchport private-vlan mapping command to assign a port to a primary VLAN.

6.Use the show vlan private-vlancommand to verify your configuration settings.

4-242