SMC Networks SMC6824M manual Access Control List Commands, Access Control Lists

COMMAND LINE INTERFACE

802.1X is enabled on port 26

reauth-enabled:	Enable
reauth-period:	3600
quiet-period:	60
tx-period:	30
supplicant-timeout:	30
server-timeout:	10
reauth-max:	2
max-req:	2
Status	Authorized
Operation mode	Multi-Host
Max count	5
Port-control	Auto
Supplicant	00-e0-29-94-34-65
Current Identifier	3
Authenticator State Machine
State	Authenticated
Reauth Count	0
Backend State Machine
State	Idle
Request Count	0
Identifier(Server)	2
Reauthentication State Machine
State	Initialize

Console#

Access Control List Commands

Access Control Lists (ACL) provide packet filtering for IP frames (based on address, protocol, Layer 4 protocol port number or TCP control code) or any frames (based on MAC address or Ethernet type). To filter packets, first create an access list, add the required rules, specify a mask to modify the precedence in which the rules are checked, and then bind the list to a specific port.

Access Control Lists

An ACL is a sequential list of permit or deny conditions that apply to IP addresses, MAC addresses, or other more specific criteria. This switch tests ingress or egress packets against the conditions in an ACL one by one. A packet will be accepted as soon as it matches a permit rule, or dropped as

4-119