SMC Networks SMC6824M manual Authorized, 39 802.1X Port Configuration

CONFIGURING THE SWITCH

•Re-authentication Period – Sets the time period after which a connected client must be re-authenticated. (Range: 1-65535 seconds; Default: 3600 seconds)

•TX Period – Sets the time period during an authentication session that the switch waits before re-transmitting an EAP packet. (Range: 1-65535; Default: 30 seconds)

•Authorized

-Yes – Connected client is authorized.

-No – Connected client is not authorized.

-Blank – Displays nothing when dot1x is disabled on a port.

•Supplicant – Indicates the MAC address of a connected client.

•Trunk – Indicates if the port is configured as a trunk port.

Web – Click Security, 802.1X, Port Configuration. Modify the parameters required, and click Apply.

Figure 3-39 802.1X Port Configuration

CLI – This example sets the 802.1X parameters on port 2. For a description of the additional fields displayed in this example, see “show dot1x” on page 4-116.

Console(config)#interface ethernet 1/2	4-171
Console(config-if)#dot1x port-control auto	4-112
Console(config-if)#dot1x re-authentication	4-114
Console(config-if)#dot1x max-req 5	4-111
Console(config-if)#dot1x timeout quiet-period 40	4-115
Console(config-if)#dot1x timeout re-authperiod 5	4-115
Console(config-if)#dot1x timeout tx-period 40	4-116
Console(config-if)#end

3-92