SMC Networks SMC6824M manual Syntax Logging sendmail level level

COMMAND LINE INTERFACE

Default Setting

None

Command Mode

Global Configuration

Command Usage

•You can specify up to three SMTP servers for event handing. However, you must enter a separate command to specify each server.

•To send email alerts, the switch first opens a connection, sends all the email alerts waiting in the queue one by one, and finally closes the connection.

•To open a connection, the switch first selects the server that successfully sent mail during the last connection, or the first server configured by this command. If it fails to send mail, the switch selects the next server in the list and tries to send mail again. If it still fails, the system will repeat the process at a periodic interval. (A trap will be triggered if the switch cannot successfully open a connection.)

Example

Console(config)#logging sendmail host 192.168.1.19

Console(config)#

logging sendmail level

This command sets the severity threshold used to trigger alert messages.

Syntax

logging sendmail level level

level - One of the system message levels (page 4-58). Messages sent include the selected level down to level 0. (Range: 0-7; Default: 7)

Default Setting

Level 7

Command Mode

Global Configuration

4-65