SMC Networks SMC6824M manual Dot1x timeout tx-period, Show dot1x

AUTHENTICATION COMMANDS

Example

Console(config)#interface ethernet 1/5

Console(config-if)#dot1x timeout re-authperiod 300

Console(config-if)#

dot1x timeout tx-period

This command sets the time that an interface on the switch waits during an authentication session before re-transmitting an EAP packet. Use the no form to reset to the default value.

Syntax

dot1x timeout tx-period seconds no dot1x timeout tx-period

seconds - The number of seconds. (Range: 1-65535)

Default

30 seconds

Command Mode

Interface Configuration

Example

Console(config)#interface ethernet 1/5

Console(config-if)#dot1x timeout tx-period 300

Console(config-if)#

show dot1x

This command shows general port authentication related settings on the switch or a specific interface.

Syntax

show dot1x [statistics] [interface interface]

•statistics - Displays dot1x status for each port.

•interface

•ethernet unit/port

-unit - Stack unit. (Range: 1-8)

-port - Port number. (Range: 1-26)

4-116