C
ONFIGURING
THE
S
WITCH
3-216
Web – Click Priority, Copy Settings. Select the source priority settings to
be copied, enter the source port or trunk number and choose the
destination interface/s to copy to, then click Copy Settings.
Figure 3-97 Mapping Priority Settings to Ports/Trunks
CLI – This feature not supported through the CLI.
Mapping CoS Values to ACLs
Use the ACL CoS Mapping page to set the output queue for packets
matching an ACL rule as shown in the following table. Note that the
specified CoS value is only used to map the matching packet to an output
queue; it is not written to the packet itself. For information on mapping
the CoS values to output queues, see page 3-204.
Table 3-16 CoS to ACL Mapping
Queue 0123
Priority 1,2 0,3 4,5 6,7