SMC Networks SMC6824M manual 261, Syntax No map ip port Default Setting

COMMAND LINE INTERFACE

Table 4-66 Priority Commands (Layer 3 and 4)

Command	Function	Mode	Page
map access-list mac	Sets the CoS value and corresponding output	IC	4-147
	queue for packets matching an ACL rule
show map ip port	Shows the IP port map	PE	4-266
show map ip	Shows the IP precedence map	PE	4-267
precedence
show map ip dscp	Shows the IP DSCP map	PE	4-268
show map access-list	Shows CoS value mapped to an access list for	PE	4-136
ip	an interface
show map access-list	Shows CoS value mapped to an access list for	PE	4-148
mac	an interface

map ip port (Global Configuration)

This command enables IP port mapping (i.e., class of service mapping for TCP/UDP sockets). Use the no form to disable IP port mapping.

Syntax

[no] map ip port

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

Example

The following example shows how to enable TCP/UDP port mapping globally:

Console(config)#map ip port

Console(config)#

4-261