SMC Networks SMC6824M manual 164, Snmp-server group

SNMP COMMANDS

Table 4-43 show snmp view - display description (Continued)

Field	Description
View Type	Indicates if the view is included or excluded.
Storage Type	The storage type for this entry.
Row Status	The row status of this entry.

snmp-server group

This command adds an SNMP group, mapping SNMP users to SNMP views. Use the no form to remove an SNMP group.

Syntax

snmp-server group groupname {v1 v2c v3 {auth noauth priv}} [read readview] [write writeview] [notify notifyview]

no snmp-server group groupname

•groupname - Name of an SNMP group. (Range: 1-32 characters)

•v1 v2c v3 - Use SNMP version 1, 2c or 3.

-auth noauth priv - This group uses SNMPv3 with authentication, no authentication, or with authentication and privacy. See “Simple Network Management Protocol” on page 3-36for further information about these authentication and encryption options.

•readview - Defines the view for read access. (1-64 characters)

•writeview - Defines the view for write access. (1-64 characters)

•notifyview - Defines the view for notifications. (1-64 characters)

Default Setting

•Default groups: public27 (read only), private28 (read/write)

•readview - Every object belonging to the Internet OID space (1.3.6.1).

•writeview - Nothing is defined.

•notifyview - Nothing is defined.

Command Mode

Global Configuration

27.No view is defined.

28.Maps to the defaultview.

4-164