SMC Networks SMC6824M manual 117

COMMAND LINE INTERFACE

Command Mode

Privileged Exec

Command Usage

This command displays the following information:

•Global 802.1X Parameters – Shows whether or not 802.1X port authentication is globally enabled on the switch.

•802.1X Port Summary – Displays the port access control parameters for each interface that has enabled 802.1X, including the following items:

-Status – Administrative state for port access control.

-Operation Mode–Allows single or multiple hosts (page 4-113).

-Mode – Dot1x port control mode (page 4-112).

-Authorized – Authorization status (yes or n/a - not authorized).

•802.1X Port Details – Displays the port access control parameters for each interface, including the following items:

-reauth-enabled– Periodic re-authentication (page 4-114).

-reauth-period– Time after which a connected client must be re-authenticated (page 4-115).

-quiet-period– Time a port waits after Max Request Count is exceeded before attempting to acquire a new client (page 4-115).

-tx-period– Time a port waits during authentication session before re-transmitting EAP packet (page 4-116).

-supplicant-timeout– Supplicant timeout.

-server-timeout– Server timeout.

-reauth-max– Maximum number of reauthentication attempts.

-max-req– Maximum number of times a port will retransmit an EAP request/identity packet to the client before it times out the authentication session (page 4-111).

-Status– Authorization status (authorized or not).

-Operation Mode– Shows if single or multiple hosts (clients) can connect to an 802.1X-authorized port.

-Max Count– The maximum number of hosts allowed to access this port (page 4-113).

-Port-control–Shows the dot1x mode on a port as auto, force-authorized, or force-unauthorized (page 4-112).

4-117