SMC Networks SMC6824M manual 101, Configuring an Extended IP ACL Command Attributes

ACCESS CONTROL LISTS

Web – Specify the action (i.e., Permit or Deny). Select the address type (Any, Host, or IP). If you select “Host,” enter a specific address. If you select “IP,” enter a subnet address and the mask for an address range. Then click Add.

Figure 3-43 Configuring Standard IP ACLs

CLI – This example configures one permit rule for the specific address

10.1.1.21and another rule for the address range 168.92.16.x – 168.92.31.x using a bitmask.

Console(config-std-acl)#permit host 10.1.1.21 4-124

Console(config-std-acl)#permit 168.92.16.0 255.255.240.0

Console(config-std-acl)#

Configuring an Extended IP ACL

Command Attributes

•Action – An ACL can contain any combination of permit or deny rules.

•Source/Destination Address Type – Specifies the source or destination IP address. Use “Any” to include all possible addresses, “Host” to specify a specific host address in the Address field, or “IP” to specify a range of addresses with the Address and SubMask fields. (Options: Any, Host, IP; Default: Any)

•Source/Destination IP Address – Source or destination IP address.

3-101