SMC Networks SMC6824M 251, Garp timer, Shows both global and interface-specific configuration

COMMAND LINE INTERFACE

Default Setting

Shows both global and interface-specific configuration.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show gvrp configuration ethernet 1/7

Eth 1/ 7:

Gvrp configuration: Disabled

Console#

garp timer

This command sets the values for the join, leave and leaveall timers. Use the no form to restore the timers' default values.

Syntax

garp timer {join leave leaveall} timer_value no garp timer {join leave leaveall}

•{join leave leaveall} - Which timer to set.

•timer_value - Value of timer. Ranges:

join: 20-1000 centiseconds

leave: 60-3000 centiseconds

leavall: 500-18000 centiseconds

Default Setting

•join: 20 centiseconds

•leave: 60 centiseconds

•leaveall: 1000 centiseconds

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•Group Address Registration Protocol is used by GVRP and GMRP to register or deregister client attributes for client services within a bridged LAN. The default values for the GARP timers are independent of the media access method or data rate. These values should not be changed

4-251