SMC Networks SMC6824M manual Sntp client, Syntax No sntp client Default Setting

COMMAND LINE INTERFACE

Table 4-22 Time Commands (Continued)

Command	Function	Mode	Page
clock timezone	Sets the time zone for the switch’s internal clock	GC	4-73
calendar set	Sets the system date and time	PE	4-74
show calendar	Displays the current date and time setting	NE,	4-74
		PE

sntp client

This command enables SNTP client requests for time synchronization from NTP or SNTP time servers specified with the sntp servers command. Use the no form to disable SNTP client requests.

Syntax

[no] sntp client

Default Setting

None

Command Mode

Global Configuration

Command Usage

•The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the switch only records the time starting from the factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2001).

•This command enables client time requests to time servers specified via the sntp servers command. It issues time synchronization requests based on the interval set via the sntp poll command.

4-69