Sharp FO-1850, FO-1650 Appear for example, G3, Number of pages transmitted or received, Properly

PRINTING OUT REPORTS AND LISTS

Explanation of headings

SENDER/	The fax number of the other machine involved in the transaction. If this
RECEIVER	machine does not have an ID function, the communication mode will
	appear (for example, "G3").
PAGES	Number of pages transmitted or received.
NOTE	OK - Transmission/reception was normal.
	P.FAIL - A power failure occurred.
	JAM - A problem with the fax paper or document occurred.
	NO PAPER - You ran out of fax paper during reception.
	CANCEL - Transmission was cancelled because the STOP key was
	pressed, no document was in the feeder, or the other machine
	requested transmission using a function which your fax does not have.
	COM.E-0to COM.E-7- A telephone line error prevented the
	transaction. Explanations of the error numbers are given in the following
	tables, however, these are primarily for use by service engineers. In
	general, you will want to simply try the transaction again. If necessary,
	check with the other party to make sure their machine is functioning
	properly.

Transmission errors

E-0	Able to recognize handshake signal, but it has errors.
E-1	Cannot recognize the handshake signal from the receiver side.
E-2	Line disconnected during transmission.
E-3	Line disconnected after modem speed fall-back.
E-4	Line disconnected during multi-page transmission.
E-6	Cannot recognize the handshake signal for next page at receiver side.
E-7	No response from receiver side or "disconnect signal" is received at transmitter side.
E-8	Error was not corrected after the predetermined number of retries because of an
	error in a part of a page.
E-11	Error occurred after or while reception by the remote (receiving) machine was
	revealed to be impossible.
E-12	Error occurred just after fall-back.
E-13	Error occurred after a response to a retransmission end command was received.

9-2 PRINTING OUT REPORTS AND LISTS