<P=005>
5When you have finished listening to your
messages, you can do any of the follow-
ing:
Erase all messages: To erase all of
the messages in the box, press "3",
"3", and "#".
Repeat playback: To listen to your
messages again, press "7" and "#".
Perform other operations: You can
enter any of the commands described
in the following section, "Other remote
operations".
Hang up: If you do not erase your
messages first, they will be saved and
any new messages will be recorded
after them. If you want the
FO-1650/1850 to resume normal
operation immediately, press "*"
twice before hanging up (in some
cases, particularly when the Transfer
function is used, the FO-1650/1850
may not accept new calls for one or
two minutes after you hang up unless
you first press "*" twice).
Comments:

When a remote command is accepted by the machi ne, you will hear one beep. If
an incorrect command is entered, you will hear four beeps. In the latter case,
re-enter the correct command.

When entering a command, do not pause longer than 10 seconds betwee n ea ch
digit. If you do, a 4-beep error signal will be issued and the digits ent ered up to
that point will be disregarded. In this case, re-enter the command from the
beginning.

If you make two errors (causing two 4-beep signals to be issued) wh il e en te ri ng
your remote code number, the line will be disconnected. This pre vents
unauthorized people from attempting to guess your remote code num b er.

If you pause for longer than 60 seconds before entering a command , yo u w il l be
disconnected.
7
33
REMOTE OPERATIONS
USING THE ANSWERING MACHINE 4-9