
SHARP
MATERIAL SAFETY DATA SHEET
Date Issued: Feb. 9,1996
MSDS No.
Section 6. Physical Chemical Characteristics
Boiling/Melting Point
Vapor Pressure
Vapor Density
Evaporation Rate
Appearance
Odor
m.p. about 70 ° C for ink
not applicable not applicable negligible
thin film coated with ink
slight wax odor
Specific Gravity
Solubility
PH
Viscosity
Color
about 1
negligible (water) not applicable not applicable black
Section 7. Fire and Explosion Data
Flash Point (Method Used): | about 250 ° C for ink |
|
Ignition Temperature: | not applicable |
|
Flammable Limits: | not applicable (LEL); | (UEL); |
Extinguishing Media: | CO2, water, dry chemicals and form etc. | |
Special Fire Fighting Procedure: | especially none |
|
Unusual Fire and Explosion Hazard: | none |
|
Sensitivity to Mechanical Impact: | no hazardous effect by mechanical impact | |
Sensitivity to Static Charge: | not applicable |
|
Section 8. Reactivity Data
Stability: | Stable |
Incompatibility (Materials to Avoid): | especially none |
Hazardous Decomposition: | not applicable |
Hazardous Polymerization: | not applicable |
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
| not required |
Engineering Control/Ventilation: | especially none |
Work/Hygienic Practice: | especially none |
Steps to be taken in case of Spill or Leak: | |
| If rumple the product and wax layer peel off, sweep up or clean with |
| vacuum cleaner and wash with water. |
Waste Disposal Method: | Disposein an approved incinerator or contrct with licensed chemical |
| disposal agency. |
| ensure conformity with governmental disposal regulations. (Dispose by |
| the same method of ordinary plastic products.) |
Section 10. Other Information
NFPA Rating (U.S.A.): | no information |
WHMIS Legislation (Canada): | not controlled |
Transport Information: | no information |
UN No.: | no information |