INSTALLING THE IMAGING FILM

The printer unit in your fax creates printed text and images by applying heat to the imaging film, which causes toner to be transferred from the film to the page. Follow the steps below to install or replace the imaging film.

1

Grasp the finger hold on the right side of

 

the printing compartment cover, and pull

 

up to open the cover.

2

3

Push back the green levers on each side of the printing compartment, and rotate the printing head frame up and to the rear.

Caution! The printing head (the strip of metal on the underside of the frame) applies heat to the printing film. It may be hot if a document has just been printed.

If you are replacing the imaging film, take the old film out of the printing com- partment and remove the three gears and the flange from the ends of the spools.

1-2

INSTALLATION

Page 8
Image 8
Sharp FO-1850, FO-1650 operation manual Installing the Imaging Film