UX1300U-TSDMDD <P=001>
MESSAGES AND SIGNALS
Display messages
CHECK PAPER SIZE The paper size setting is incorrect. Change the
paper size setting as described in "Loading the
Paper" in Chapter 1.
COVER OPEN The printing compartment cover is open. Close it.
DOCUMENT JAM The original document is jammed. See the
following section, "Clearing Paper Jams".
FAX RX IN MEMORY
A fax has been received in memory because the
imaging film needs replacement, you have run
out of printing paper, or the paper is jammed.
The fax will print out automatically when the
problem is fixed.
FILM END The imaging film may need replacement. Check
the film and replace it if necessary.
FUNCTION MODE The FUNCTION key has been pressed.
LINE ERROR Transmission or reception was not successful.
Press STOP to clear the message, and then try
again.
LINE IS IN USE
An extension phone connected to the fax is
being used. Do not lift the fax’s handset or
attempt transmission at this time, as this will
interrupt the conversation on the extension
phone.
MEMORY IS FULL The memory is full. See "Memory" in Chapter 7.
MEMORY PRINTING The fax is preparing to or printing out a
document from memory.
ON HOOK DIAL The SPEAKER key has been pressed and the
fax is waiting for you to dial.
OUT OF PAPER You are out of printing paper.
OVER HEAT The print head has overheated. Operation can
be continued once it cools.
PAPER JAMMED The printing paper is jammed. See the following
section, "Clearing Paper Jams".