UX1000U-IPSN
RT <P=001>
ENTERING YOUR NAME AND FAX NUMBER
To have your name and fax/telephone number (called the "Send er’s name" and
"Sender’s number") printed at the top of every page you transmit, program them by
pressing the panel keys as shown below.
♦You must program your name and fax number in order to comply wit h th e
Consumer Protection Act of 1991 (see inside of front cover).
♦If you enter an incorrect number or letter, press the HOLD/SEARCH key to
move the cursor back to the mistake, then enter the correct number or let t e r. (T o
move the cursor forward, press the SPEAKER key.)
1Press the keys shown at left. "ENTRY
MODE" will appear in the display.
2Press the "#" key 2 times. "OWN NUM-
BER SET" will appear in the display.
3Press the START key.
4Enter your fax number (max. of 20 dig-
its) by pressing the number keys. (To in-
sert a space between digits, press the
"#" key. To insert a "+", press the "*"
key.)
(Example)
5Press the START key.
6Enter your name by pressing the appro-
priate number keys as shown on the fol-
lowing page. Press each key repeatedly
until the desired letter appears in the dis-
play. (Max. of 24 characters.)
(Example: "SHARP")
7Press the START key and then the
STOP key.
STOP
START
7 7
START
5
5
5
4
3
2
1
FUNCTION
3
START
777 7
444
22
7 7 7 7
SPEAKER
7