Connecting the DVD receiver

FM Antenna Connection

 

Speaker Connection

 

 

 

Connect the supplied FM antenna to the FM ANTENNA socket on the unit.

If reception is poor, connect the outdoor antenna.

Note

Before attaching a 75 ohm coaxial cable, disconnect the supplied FM antenna.

Subwoofer

Caution

To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the speakers.

Caution

To avoid noise, keep antennas away from the system, the connecting cord and the AC power cord.

En

Before connection

Check the impedance of your speakers. Connect speaker with an impedance of 4 ~ 16 .

The black speaker terminals are “-” (negative). Generally, the “+” side of the speaker cable is marked to make it distinguishable from the “-” side of the cable. Connect this marked side to the “+” terminal and the unmarked side to the black “-” terminal.

How to connect

 

 

1

Turn the terminal cap counterclockwise to loosen

 

it. The speaker terminal caps cannot be fully re

 

moved from the base.

 

 

2

Insert the wire into the terminal fully and turn the

 

terminal cap clockwise to securely connect it:

 

 

Subwoofer

Connect a subwoofer using a commercially-available RCA cable. Use a subwoofer with built-in amplifier referred to as a “powered subwoofer”.

8

Page 8
Image 8
Onkyo DR-645 Connecting the DVD receiver, FM Antenna Connection Speaker Connection, Before connection, How to connect