Settings

Introduction

This chapter describes how to use the SETUP menu. Most settings and adjustments are required to be set when you first use the system.

 

 

1

Turn on the unit and the connected television or

 

monitor.

 

• The SETUP menu is available only in the “DVD

 

Source” mode or the “USB Source” mode. If

 

another source is selected, press INPUT on the unit

 

to select the “DVD Source” or the “USB Source”.

 

• You can also use the remote control’s DVD or

 

iPod/USB to select source.

 

 

2

Press SETUP.

 

The SETUP menu appears on the screen.

 

• To exit the SETUP menu, press SETUP again.

 

• Although it is possible to enter the SETUP menu

 

during playback (or resume mode), not all menu

 

functions will be available. To expand the number

 

of available functions, press 2twice.

3

Use q/w/e/rto navigate the menus.

 

If no cursor is visible on the screen, use e/rto

 

select a page.

 

• Use q/wto highlight menu items within the

 

selected page.

 

• Press eto return to the upper menu.

4

Press rto enter the menu item.

5

Use q/wto select the options within the menu

 

item, and press ENTER to confirm the entry.

 

Individual menu functions are described.

 

Repeat steps 3 through 5 as required.

 

 

6

Press SETUP to exit the SETUP menu.

GENERAL SETUP

TV DISPLAY

The shape of the television or monitor may not match the shape of the movie frame. To avoid distortion on older televisions, you may need to change the way in which the image is displayed. Televisions use a 4:3 aspect ratio; high-definition televisions use 16:9 aspect ratio (as do movies).

Note

`4:3 PANSCAN:

This mode is used with 4:3 televisions. 4:3 images are displayed normally. When showing 16:9 programmes, the full height of the screen is displayed, and the left and right part of the image are cut off.

4:3 picture

16:9 picture

`4:3 LETTERBOX:

This mode is used with 4:3 televisions. 4:3 images are displayed normally. 16:9 images are visible at their full width, but there are blank area at the top and bottom of the screen.

4:3 picture

16:9 picture

`16:9:

Use with a 16:9 wide television.

4:3 picture

16:9 picture

Some wide-screen discs that do not permit the Pan Scan mode playback are automatically played in Letter Box mode.

Depending on the DVD, “4:3 LETTERBOX” may be selected automatically instead of “4:3 PANSCAN” and vice versa.

If “16:9” is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin).

You may need to read your television’s manual in conjunction with this section in order to achieve the best results. Some discs do not allow the aspect ratio to be changed and you will therefore have to change the aspect ratio on the TV.

Make this setting while playback is stopped; you

En

cannot do this while playing back a disc.

25

Page 25
Image 25
Onkyo DR-645 instruction manual Settings, Introduction