![](/images/new-backgrounds/1297080/29708059x1.webp)
Listening to an External Source
|
|
1 | Connect a cassette tape deck etc. to LINE 1 IN |
| jack of the unit using |
| RCA cables. |
| Or Connect the audio output jack of a portable |
| audio player to the LINE 2 IN jack of the unit. |
| • When you connect the portable audio player to |
| LINE 2 IN jack of the unit, use the stereo mini plug |
| cable. |
|
|
2 | Press LINE to select “LINE1 Source” or “LINE2 |
| Source”. |
3 | Play the source, and adjust the volume using |
| q VOL wof the unit and of the audio player. |
You can also adjust the volume by using the VOLUME knob on the unit.
Sleep Timer
The power can be switched off after a specified amount of time.
Press SLEEP repeatedly until desired time appears on the display.
`SLEEP 10, 20, 30, 60 or 90:
The power will be switched off 90 (60, 30, 20, or 10) minutes later.
`SLEEP OFF:
The sleep timer is off.
•If you want to check the remaining time, press SLEEP once. The remaining time will be displayed for 3 seconds, and then return to the normal display.
Wake Up Timer
The unit can be programmed to turn on at a specified time.
•Adjust the clock before setting the timer.
1If the unit is on, press 9 ON/STANDBY to turn the unit standby.
2Press CLOCK to show the time on the display.
3Press TIMER.
“Timer Set” appears on the display, and the “hour” value starts blinking.
•When no button is pressed for 30 seconds, the timer setting mode will be cancelled.
4Press q VOL wto set the start time (hour), and then press TIMER.
The “minutes” value starts blinking.
5Press q VOL wto set the start time (minute), and then press TIMER.
The “Off” starts blinking.
6Press q VOL wto turn On or Off the timer function, and then press TIMER.
Select “On” to turn the timer function on. The
TIMER indicator ( ) appears on the display. When you do not use the timer, select “Off”. (The TIMER indicator disappears from the display.)
7Turn the unit on and prepare the source.
•To play a disc, select “DVD Source” using INPUT and set a disc.
•To play a USB flash drive, select “USB Source” using INPUT and set a USB flash drive.
•To listen to the FM, select “FM Radio” using INPUT and tune in a station.
8Press 9 ON/STANDBY to turn the unit standby.
•The unit will turn on at the specified time every day.
•The unit turns on with the source that was last selected.
Do not forget to turn the unit to standby, or the timer will not work.
If the timer reaches the
If you want to listen continuously, press SLEEP repeatedly to select “SLEEP OFF” before reaches the
En
30