Connection to a TV

Caution

Turn the power off to all components before making connections.

Read the instructions of each component you intend to use with this unit.

Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

BC A

Component video cable

RCA video cable

HDMI cable

TV (Monitor)

Adjust the video aspect ratio to match that of the television.

This unit adopts analog copy protection features. If the unit is connected to a TV through a VCR (video cassette recorder), the resulting playback may be affected. Connect the unit directly to the television.

In all cases, use the highest quality cables for the best possible picture.

Select proper setting in the “VIDEO SETUP”.

AHDMI video/audio output jack

Use an HDMI cable to connect the unit to an HDMI compatible television or monitor.

If the television or monitor is equipped only with a DVI terminal, a suitable adapter cable or adapters should be used. Note that the television connected in this way must be HDCP compatible. Also note that this connection outputs no sound.

Make sure that you read and understand the documentation provided with the HDMI component.

HDMI video output formats

• 480p (60Hz)

• 576p (50Hz)

• 720p (50Hz) or 720p (60Hz)

• 1080i (50Hz) or 1080i (60Hz)

• 1080p (50Hz) or 1080p (60Hz)

To output audio from the HDMI jack

If the connected HDMI component is capable of inputting HDMI audio, digital audio can be output from the HDMI jack.

Only PCM digital audio can be output from the HDMI jack.

BComponent video output jacks

Use component video cables to connect the unit to the component video inputs of a suitably equipped television or monitor to enjoy a high-quality picture. Use these terminals in preference to composite video connections.

If the component video terminals are connected to a television with progressive scan capabilities, the output can be set to match this.

Note that these jacks cannot be connected to high definition component jacks.

CComposite video output jack

Use a RCA (pin) video cable to connect the unit to the composite video connector of a television or monitor. Use this connection only if no other video connection method is available.

En

9

Page 9
Image 9
Onkyo DR-645 Connection to a TV, Hdmi video/audio output jack, Component video output jacks, Composite video output jack