Onkyo DR-645 Connection to Audio Components etc, Digital audio output jack, Power cord receptacle

Connection to Audio Components etc.

Caution

•Turn the power off to all components before making connections.

•Read the instructions of each component you intend to use with this unit.

•Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

F E D

RCA audio cable audio cable RCA coaxial digital

Cassette tape	Digital audio component
deck, etc.	(CD recorder,
	MD deck, etc.)
To AC wall outlet

DDigital audio output jack

Digital audio from DVD-Video, CD and Video CD is output from this jack. Connect an amplifiers including a decoder, or digital audio components such as CD recorder, etc. to this jack using commercially-available coaxial digital audio cable.

•Select “ALL” or “PCM only” in the “DIGITAL AUDIO SETUP”.

ELINE 1 IN/LINE OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect a cassette tape deck etc. to these jacks using commercially-available RCA cables.

Make sure to connect:

•white plug: white jack (L: left channel)

•red plug: red jack (R: right channel)

FPower cord receptacle

After all other connections have been made, insert the supplied AC power cord into this receptacle, then connect the other end of the power cord into the wall socket.

•In order to avoid the risk of electric shock, fire, and so on, only use the supplied power cord.

•If you are not going to use the unit for some time, disconnect the power cord from the wall socket.

En

10