iPod
To play your iPod through this unit, you must first attach | Handling precautions | |
the Universal Dock Adapter for your model of iPod. |
| |
Prepare the adapter that came with your iPod. | ||
|
Compatible iPod models
Made for:
•iPod touch (1st and 2nd generation)
•iPod classic
•iPod (5th generation)
•iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
Note
•Before using this unit, update your iPod with the latest software, available from the Apple Web site.
Caution
•If you use a case with your iPod, always remove it before you insert it. Otherwise, it may not connect properly and a malfunction may occur.
•Do not insert your iPod into the dock connector without the Universal Dock Adapter that came with it, as it may put unnecessary strain on the iPod or unit’s dock connector, causing permanent damage.
•To prevent dock connector damage, don’t twist your iPod when inserting or removing it, and be careful not to knock your iPod while it’s inserted.
•Don’t use your iPod with any other accessories, such as FM transmitters and microphones, because they may cause a malfunction.
•Use the Universal Dock Adapter that supplied with the iPod or a commercially available one to use the other types of iPod.
•If the Universal Dock Adapter is not supplied, or if you lose it, purchase a new Apple Universal Dock Adapter.
•When the iPod is inserted, input source is selected to
“iPod” and start playback from music list automatically.
•The iPod is charged when it is inserted into the dock and the unit’s power consumption is increased.
•When the iPod is inserted, the video signal is output from this unit with no video played back on the iPod LCD screen.
How to open the dock cover
Universal Dock Adapter supplied with your iPod
How to insert the iPod
■Attaching the Universal Dock Adapter
Fit the front edge of the adapter into the dock, and then press in the back edge of the adapter onto the dock until a slight “click” is heard indicating the adapter is inserted correctly.
■Removing the Universal Dock Adapter
To remove the Universal Dock Adapter from this unit, attach a small flathead screwdriver into the slot, and lift it out, as shown below.
En
16
