Basic Operation
Recording a Source
You can record a source onto a CD recorder or a cassette tape recorder connected to the COAXIAL DIGITAL
AUDIO OUT jack or the LINE OUT jacks.
1 Select a source to be recorded by pressing DVD,
iPod/USB, FM, or LINE.
2 Start recording.
•When the recording device is connected to the LINE 1 IN jack and the LINE OUT jack, you cannot select the LINE 1 Source for the recording source.
Dimmer
Press DIMMER to dim the display.
Press DIMMER again to cancel the dimmer function.
Muting
To mute the sound temporarily, press MUTING. Press MUTING again to restore the sound.
•“MUTING” blinks on the display while muting is engaged.
•If you change the volume when the sound is muted, it will be unmuted.
Listening to a Disc
1 Press DVD to select “DVD Source”.
•When no disc is loaded in the disc tray, “NO DISC” is displayed.
|
|
2 | Press 0on the unit to open the tray. |
3 | Place the disc on the disc tray (with the printed |
| side up). |
4 | Press 0on the unit again to close the tray. |
| • Some discs may automatically start playback. |
|
|
5 | Press 1/3to start playback if playback has not |
| started automatically. |
If a menu is shown on screen (some DVD or video discs may show such a menu), see
Listening to an iPod
|
|
1 | Press iPod/USB once or twice to select “iPod”. |
2 | Push your iPod firmly onto the unit’s dock |
| connector. |
| Never insert the iPod into dock connector without |
| the Universal Dock Adapter. |
|
|
3 | Press 1/3to start playback. |
■
When charging the iPod, the power consumption may reach up to a maximum of 14 W.
Super Bass boost
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press S.BASS to get the effect.
Press S.BASS again to cancel the effect.
Adjusting the bass and treble
You can change the bass and treble sound between
|
|
1 | Press TONE repeatedly to select Bass or Treble. |
2 | Press q VOL wto adjust the sound level. |
Listening to a USB Flash Drive
|
|
1 | Press iPod/USB once or twice to select “USB |
| Source”. |
2 | Plug your USB flash drive into the USB port. |
| It takes a few seconds for the unit to load the USB |
| flash drive. Some files may automatically start |
| playback. |
| • You can reverse steps 1 and 2. |
|
|
3 | Press 1/3to start playback if playback has not |
| started automatically. |
|
|
Note
• Do not unplug the USB flash drive before playback is stopped.
En
19
