<P=002>
Note: If needed, you can change the transfer number from a re m ot e lo cation. See
"Other remote operations" in the previous section, "Remote operations".

Recording the transfer message

The transfer message plays when you answer the telephone, and infor ms you that
the call is a transfer call. It can be up to 15 seconds long. To record a transf er
message, follow the steps described in "Recording an outgoi ng message" in
"Answering Machine Set-up" in Chapter 2. The following is an example:
"Hello. This is a transfer call for (YOUR NAME). Enter your remote code number
now."
Note: If needed, you can record the transfer message from a remote location. See
"Other remote operations" in the previous section, "Remote operations".

Turning the Transfer function on and off

1Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
2Press the keys shown at left. "TRANS-
FER FUNC" will appear in the display.
3Press "1" to turn the Transfer function
on, or "2" to turn it off. (If you pressed
"2", go to Step 5.)
4Enter the number of the box for which
you want the Transfer function to oper-
ate (for the General Box, enter "0").
5Press the STOP key.
or
0
FUNCTION
STOP
1
2
1
(Example)

OTHER FUNCTIONS

4-14 USING THE ANSWERING MACHINE